•  

    May 2012
    M T W T F S S
    « Apr    
     123456
    78910111213
    14151617181920
    21222324252627
    28293031  
  • Recent Posts

  • Advanced Random Posts

  • Categories

  • Recent Comments

  • Partner links


  • « | Main | »

    computer startup problems|Computer startup problems. What’s going on?

    By admin | June 13, 2011

    Welcome to my website,news book blog: new computer technology ,Not’s about best games for ipod touch.
    The following not about computer startup problems,But funnyA dress is like a barbed fence. It protects the premises without restricting the view.An ounce of luck is better than a pound of wisdom.There should be a better way to start a day than waking up every morning. Birth is much, but breeding is more..Every man is the architect of his own fortune.。!!

    computer startup problems–: Computer startup problems. What’s going on?
    Ok… So I turn on my laptop. It gives me that Acer screen. Then goes to the boot screen (the one that looks like an MS-DOS script). Then it goes right back to the original Acer screen. So, what’s it’s problem?


    The answer in the following: (Hint: The reader is not the correct identification.)

    Answer by cam5465
    Looks likes time to get a new computer. That is what your computer is trying to tell you.

    Answer by The Brain
    your computer might not be recognizing the operating system. Try reinstalling your operating system.

    Know better? Leave your own answer in the comments!

    5604804618 02f37ea1e2 m computer startup problems|Computer startup problems. Whats going on?
    by hackNY

    computer startup problems
    These are useful by me!,This blog is about new computer technology ,Not’s about Flight Watch Buying Guide Blog.

    Question–: Computer startup problems?
    Suddenly my computer wont startup, thought the operating system was corrupted but wen i plug another hard drive into it that has a perfectly good operating system workin it does the same thing.. Which is jus as the windows loadin screen comes up a blue screen flashes saying a bunch of stuff that cant be read.. Then the computer resets an repeats the process.. I’ve reset the bios settings to fail safe mode, the computer detects the harddrive, ram an obviously cpu.. Safe mode wont load.. The computer gives one beep at startup.. Wat is wrong?
    I did wat you recommended already.. I took a hard drive from a perfectly workin computer an put it in the computer thats given problems an it wouldn’t startup still.. Then wen i put that harddrive back into the other computer i took it from it was working fine???

    So it doesn’t seem like a operating system problem or harddrive problem on the faulty computer which is wierd an tricky..

    Basicaly when i put in a new hard drive wit a 100% working operating system, it gives the same problems


    The answer in the following: (Hint: The reader is not the correct identification.)

    Answer by Analdis
    Try changing the memory chips

    Answer by chris j
    Try pressing f8 repeatedly and try loading settings from last known working settings. I cant figure out exactly what would be wrong with your machine.

    Answer by Aeristes
    Realize that the operating system is on the hard drive. So if you put in a hard drive with Vista it will boot Vista. So it still could be the OS. I’m also assuming you have XP as the Blue Screen of Death is not that popular for Vista.

    So it sound like the hard drive is failing or the Master Boot Record (MBR) is failing. Both are bad. It could also just be a nasty virus. What I would try to do is keep you hard drive plugged in, and then set a working hard drive as the primary. Boot it from the working hard drive and then see if you can access the broken one and back-up the files you need. Then format the sucker.

    If you can’t access the hard drive at all, then its fried pretty good and you won’t be able to get your data without going to a specialist, and even then, nothing is guaranteed.

    Answer by Jinsha
    Blue screen treatment, you can refer to
    new hardware detection of new services
    Trojan virus detected
    checks BIOS and hardware compatibility
    run “sfc / scannow” system to check whether documents have been replaced, and then use the installation disk to restore the system
    upgrade SP2 or SP3
    motherboard refresh virus infection
    BIOS were damaged, need to be replaced
    see ditail here
    http://blogs.digitalmediaonlineinc.com/repairpcerror/entry/20090608

    Answer by David
    OK, here’s the real nitty gritty off your problem.
    The reasons for blue error screens are many and varied. It happens when the system encounters a critical error. By default the system is set to restart on critical error, this can be disabled so that the blue screen stays visible. In reality there’s not much point in doing this as the error message is difficult to interpret, also reference to the Microsoft help and support articles web site is needed.

    Transplanting a hard drive from one system to another proves nothing, even though the donor system is working correctly. The donor system has a different motherboard, CPU, RAM and maybe expansion cards, therefore a totally different set of drivers installed. The result is going to be critical errors i.e. blue error screen. This would in reality be expected.

    Now to the problem.
    One of the most common problems to cause blue screens is Hard Drive corruption, so the first thing to do is to do a full scan of the drive for errors. This then has to be done using an original Microsoft install CD, as we have no access to the system.

    I am now assuming you are running XP as you don’t say what the OS is.
    So you will need the Windows XP install CD, not a recovery set.

    Place the CD in the drive and re-boot the system as the system boots you should be given the option “Press any key to boot from cd” press a key. The system will boot from the CD. Allow it to boot to the first screen where it will give you 3 choices.

    You now need to select repair using the recovery console, press R.
    The recovery console window will open. You will be asked, which Windows system do you want to log onto enter 1 then press enter. You are then asked to enter the Administrator password, if there is one enter it and press the enter key, if there is not a password just press enter. You will now be logged into the recovery console.

    Enter the following command exactly as shown including the spaces followed by the enter key.

    chkdsk /r c:

    The check disk utility will now run, this will take some time, just wait and let it complete. When it completes type “exit” press enter key. The system will now re-start. Do not boot from the CD let it boot normally. All being good the system should now boot up. If not there is still another option left. Come back to me for the details of this if you need to.

    If your using Vista the process should be much the same.
    If you do not have an original install CD try to borrow one for this purpose only, otherwise you have no option but to recover the system using the original recovery media.

    Know better? Leave your own answer in the comments!
    _______________________

    ___________________

    Topics: Computer Failure | No Comments »

    You might also like

    computer startup problems|Computer Startup Problems -Fixed- My edited the following,In the blog: Computer Technology ,Not's about...
    computer startup problems|Brother MFC9560cdw Color Laser All-in-One with Wireless Networking and Duplex More Computer Startup Problems Products...
    computer startup problemsTechnophiles turn their ideas into startup businesses Wonderful computer startup problems: hackNY 2011 Spring Student Hackathon Image by hackNY Photo...
    computer startup problems|computer startup problem screen goes black black screen appears right after startup and the computer freezes....
    Grab This Widget

    Comments